Octa-Mills
Shell Mills
Shell Mills
| Tool # | D | D-1 | Flutes | B | B-1 | L | Bore | Key | Ramp | Insert | Screw | Wrench |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OC-2000 | 2.000 | 1.625 | 3 | .160 | .410 | 1.750 | .750 | .312 | 10 Deg. | OPEB-535 | 838T | T-20 |
| OC-2500 | 2.500 | 2.125 | 4 | .160 | .410 | 1.750 | 1.000 | .375 | 7 Deg. | OPEB-535 | 838T | T-20 |
| OC-3000 | 3.000 | 2.625 | 5 | .160 | .410 | 1.750 | 1.000 | .375 | 5 Deg. | OPEB-535 | 838T | T-20 |
| OC-4000 | 4.000 | 3.625 | 6 | .160 | .410 | 1.750 | 1.500 | .625 | 3 Deg. | OPEB-535 | 838T | T-20 |
| OC-5000 | 5.000 | 4.625 | 6 | .160 | .410 | 1.750 | 1.500 | .625 | 2 Deg. | OPEB-535 | 838T | T-20 |
| OC-6000 | 6.000 | 5.625 | 7 | .160 | .410 | 1.750 | 1.500 | .625 | 1 Deg. | OPEB-535 | 838T | T-20 |
Round inserts are also available
Pocketing
Ramping
Top
Chamfers
Chamfers
Face
Milling
Milling
