Heavy Duty Octa-Mills
| Tool # | D | D-1 | Flutes | B | B-1 | L | Bore | Key | Insert | Screw | Wrench |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HDOC-3000 | 3.000 | 2.400 | 4 | .300 | .700 | 2.000 | 1.000 | .375 | ONMB-85 | 1462T | T-532 |
| HDOC-4000 | 4.000 | 3.400 | 5 | .300 | .700 | 2.250 | 1.500 | .625 | ONMB-85 | 1462T | T-532 |
| HDOC-5000 | 5.000 | 4.400 | 6 | .300 | .700 | 2.250 | 1.500 | .625 | ONMB-85 | 1462T | T-532 |
| HDOC-6000 | 6.000 | 5.400 | 7 | .300 | .700 | 2.250 | 1.500 | .625 | ONMB-85 | 1462T | T-532 |
| HDOC-8000 | 8.000 | 7.400 | 9 | .300 | .700 | 2.250 | 2.500 | 1.000 | ONMB-85 | 1462T | T-532 |
| HDOC-1000 | 10.000 | 9.400 | 11 | .300 | .700 | 2.250 | 2.500 | 1.000 | ONMB-85 | 1462T | T-532 |
| HDOC-1200 | 12.000 | 11.400 | 13 | .300 | .700 | 2.250 | 2.500 | 1.000 | ONMB-85 | 1462T | T-532 |
Round inserts are also available
Top
Chamfers
Chamfers
Face
Milling
Milling
Face Mill - Slot - Chamfer
16 Edges Per Insert On Double Sided Inserts