Slotting Cutters / Half Side Mills
Series #00
Series #00
| Tool # | D | Flutes | W.O.C. | D.O.C. | Bore | Key | Hub | T |
|---|---|---|---|---|---|---|---|---|
| SC-4000 | 4.000 | 10 | .250 to .340 | 1.090 | 1.250 | .312 | 1.630 | .340 |
| SC-5000 | 5.000 | 12 | .250 to .340 | 1.590 | 1.250 | .312 | 1.630 | .340 |
| SC-6000 | 6.000 | 14 | .250 to .340 | 1.900 | 1.500 | .375 | 2.000 | .340 |
| Tool # | Cartridge | Wedge | Wedge Screw | Insert | Screw | Wrench |
|---|---|---|---|---|---|---|
| SC-4000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
| SC-5000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
| SC-6000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
Cutters can be used as:
Right Hand
Left Hand
Staggered
Right Hand
Left Hand
Staggered
Initial width to be set with a dial indicator.
K-Tool can set the width at no charge before shipping.
K-Tool can set the width at no charge before shipping.
Side
Slotting
Slotting
Slotting
Shoulder
Milling
Milling
Face
Milling
Milling
Periphery
Milling
Milling
Note:
When set staggered, tools are to be run as 1/2 the number of flutes effective.
When set staggered, tools are to be run as 1/2 the number of flutes effective.
.250 - .340 W.O.C.