Slotting Cutters / Half Side Mills
Series #2
Series #2
| Tool # | D | Flutes | W.O.C. | D.O.C. | Bore | Key | Hub | T |
|---|---|---|---|---|---|---|---|---|
| SC-402 | 4.000 | 8 | .530 to .687 | 1.090 | 1.250 | .312 | 1.630 | .625 |
| SC-502 | 5.000 | 10 | .530 to .687 | 1.590 | 1.250 | .312 | 1.630 | .625 |
| SC-602 | 6.000 | 12 | .530 to .687 | 1.900 | 1.500 | .375 | 2.000 | .625 |
| SC-802 | 8.000 | 16 | .530 to .687 | 2.900 | 1.500 | .375 | 2.000 | .625 |
| SC-1002 | 10.000 | 16 | .530 to .687 | 3.900 | 1.500 | .375 | 2.000 | .625 |
| Tool # | Cartridge | Wedge | Wedge Screw | Insert | Screw | Wrench |
|---|---|---|---|---|---|---|
| SC-402 | #332C-RH/LH | #3 | #10 | SPEB-332P | 538T | T-10 |
| SC-502 | #332C-RH/LH | #3 | #10 | SPEB-332P | 538T | T-10 |
| SC-602 | #332C-RH/LH | #3 | #10 | SPEB-332P | 538T | T-10 |
| SC-802 | #332C-RH/LH | #3 | #10 | SPEB-332P | 538T | T-10 |
| SC-1002 | #332C-RH-LH | #3 | #10 | SPEB-332P | 538T | T-10 |
Cutters can be used as:
Right Hand
Left Hand
Staggered
Right Hand
Left Hand
Staggered
Side
Slotting
Slotting
Slotting
Shoulder
Milling
Milling
Face
Milling
Milling
Periphery
Milling
Milling
.530 - .687 W.O.C.
Initial width to be set with a dial indicator.
K-Tool can set the width at no charge before shipping.
K-Tool can set the width at no charge before shipping.
Note:
When set staggered, tools are to be run as 1/2 the number of flutes effective.
When set staggered, tools are to be run as 1/2 the number of flutes effective.