Slotting Cutters / Half Side Mills
Series #00
Series #00
| Tool # | D | Flutes | W.O.C. | D.O.C. | Bore | Key | Hub | T |
|---|---|---|---|---|---|---|---|---|
| SC-4000 | 4.000 | 10 | .250 to .340 | 1.090 | 1.250 | .312 | 1.630 | .340 |
| SC-5000 | 5.000 | 12 | .250 to .340 | 1.590 | 1.250 | .312 | 1.630 | .340 |
| SC-6000 | 6.000 | 14 | .250 to .340 | 1.900 | 1.500 | .375 | 2.000 | .340 |
| Tool # | Cartridge | Wedge | Wedge Screw | Insert | Screw | Wrench |
|---|---|---|---|---|---|---|
| SC-4000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
| SC-5000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
| SC-6000 | #1511C-RH/LH | #1 | #6 | SPEB-1511CB | 164T | T-6 |
Cutters can be set as:
-Half Side Right Hand
Left Hand
-Full Slot - W.O.C. Required
-Half Side Right Hand
Left Hand
-Full Slot - W.O.C. Required
Initial width to be set with a dial indicator.
K-Tool can set the width at no charge before shipping.
K-Tool can set the width at no charge before shipping.
Side
Slotting
Slotting
Slotting
Shoulder
Milling
Milling
Face
Milling
Milling
Periphery
Milling
Milling
When set staggered, tools are to be run as 1/2 the number of flutes effective.
.250 - .340 W.O.C.
NOTE:
Adjustable High Shear Cartridge Style Cutters